Making the rails:
- RAIL.jpeg (445.03 KiB) Viewed 34921 times
1. First I do the deck as seen on the pics. STEP 1
2. When the deck is finished, I make the lower rails, gluing the strips parallel to the deck level. STEP 2.
- RAILS HOWTO_01.jpg (477.31 KiB) Viewed 34921 times
3. When the lower rail is finished, I use the fad to even out the deck and lower rail. STEP 3
- RAILS HOWTO_02.jpg (477.9 KiB) Viewed 34921 times
4. Then I glue on the upper rail, strip by strip, parallel to the deck. STEP 4
- RAILS HOWTO_03.jpg (482.87 KiB) Viewed 34921 times
5. Then I even out the upper rail and glue the bottom, strip by strip.
Here's another pic of the finished rail where you see the details. The upper rail is sitting on top of everything. Looks quite smooth.
- DSC01350.jpg (1.08 MiB) Viewed 34921 times
And one of the tip block where everything comes together:
- DSC01351.jpg (958.29 KiB) Viewed 34921 times
cheers, tungsten